Coconuts Hard Wax

Usage Instructions – Hard Wax

1. 1. Area to be Waxed must be clean, dry and free from any oils and creams. Use Waxxxpress On Your Marks Pre Wax Skin Cleanser. Always test Wax on the inside of your wrist before use. Do not apply on warts, moles and broken or irritated skin.
   2. You may begin by dipping Applicator into Wax, which should be the consistency of thick honey.
   3. Apply Wax with the hair growth, leaving one edge thicker to create a lip. Hard Wax should be applied in a thick section. Wax will remain smooth and soft, maintaining its elasticity and pliability.
   4. Hold skin taut and remove Wax by pulling in the opposite direction of hair growth.
   5. For the perfect finish and to remove any Wax residue on the skin, we recommend you use Keep Calm and Waxxx Off After Waxing Oil and Body Icing. To clean equipment use Clean & Glo Wax Remover Citrus Clean.

Heating Instructions – Melts

1. Place Melts into Metal Insert of Wax Heater, do not overfill past ¾ full.
2. Heat Wax on high for approximately 10 minutes, stirring regularly.
3. Regulate Heater to a medium setting or between dial 3-4 on a Big Dipper Wax Heater or approximately 140°For 60°C.
4. Dip Wax Applicator into Wax, at the correct consistency Wax should resemble a thick honey and should sit on the end of the Applicator and be practically dripless. If Wax is moving, it is too hot. It is not necessary to melt down Wax completely, a core at the centre is ideal.
5. Top up Melts throughout use to maintain heat consistency, do not fill Insert past ¾ full and Wax should always be able to be stirred.

Heating Instructions – Microwave to Pot™

1. Place a Wax Heater Insert into your Waxxxpress Big Dipper Wax Heater. Microwave to Pot™ technology jars should not be placed directly into a Wax Heater.
2. To warm Wax directly in your Waxxxpress Big Dipper Wax Heater, remove the lid and insert jar directly into an appropriate professional Wax Heater on a medium setting.
3. To use Microwave to Pot™ technology, Remove lid from jar and place off centre in microwave and heat for a minimum of 2 minutes, but no longer than 4 minutes depending on the wattage of your microwave and the amount of Wax remaining in the jar.
4. Once Wax has softened, place jar into your Big Dipper Wax Heater Insert. Regulate Heater to a medium setting of approximately 149°F–167°F or 65°C–75°C, between dial 3-4 on your Waxxxpress Big Dipper Wax Heater.
5. Dip Wax Applicator into Wax, at the correct consistency Wax should resemble a thick honey and should sit on the end of the Applicator and be practically dripless. If Wax is moving, it is too hot.

Heating Instructions – Beads

1. Pour Wax Beads into the Metal Insert of a Wax Heater in stages, stirring in between until it melts. Do not overfill past ¾ full.
2. Heat Wax Beads on high for approximately 10 minutes, stirring regularly.
3. Regulate Heater to a medium setting or between dial 3-4 on a Big Dipper Wax Heater or approximately 140°For 60°C.
4. Dip Wax Applicator into Wax, at the correct consistency Wax should resemble a thick honey and should sit on the end of the Applicator and be practically dripless. If Wax is moving, it is too hot. It is necessary to melt down Wax completely.
5. Top up Beads gradually after each use to maintain heat consistency, do not fill Insert past ¾ full and Wax should always be able to be stirred.

Important

Store in a cool, dry place. Due to pliability of Wax, in hot climates over 68°F or 20°C we recommend you freeze or refrigerate for approximately 1-2 minutes before opening.

Warning

This is a professional product for Salon use only. Patch test before use. If skin irritation occurs, cease use. Exceeding the recommended instructions may cause burns and/or injury.

• Important: Do not heat over 140°C/284°F
• Place a Wax Heater Insert into your Waxxxpress Big Dipper Wax Heater. Microwave to Pot™ technology jars should not be placed directly into a Wax Heater
• Do not try this with other brands’ pots; they will melt in the Wax Heater